logo
цитата
продукты
продукты
Дом > продукты > Epoxy Powder Coating > Weather-resistant double-layer anti-corrosion powder
Катагории
Контакты
Контакты: Mr. Sindara Steel
Факс: 86-731-89695778
Контакт теперь
Напишите нам.

Weather-resistant double-layer anti-corrosion powder

Детали продукта

Место происхождения: КИТАЙ

Фирменное наименование: Sindara steel

Сертификация: ISO 9001, ISO 14001, ISO 45001, CE

Номер модели: (Стандарт ГБ/Т 42541-2023)

Условия оплаты & доставки

Количество мин заказа: 1ton

Цена: 100USD-5000USD

Время доставки: 10-30 дней

Условия оплаты: L/C, T/T.

Поставка способности: 1000000

Получите самую лучшую цену
Выделить:

double-layer anti-corrosion powder

,

Weather-resistant anti-corrosion powder

Weather-resistant double-layer anti-corrosion powder

Description

 

Weather-resistant double-layer anti-corrosion powder(Standard GB/T 42541-2023)

 

The product is subject to GB/T 42541-2023 standard, which is a powder coating

composed of bottom epoxy powder and surface polyester powder.It is suitable for overhead steel pipe with nominal diameter of 15mm and working temperature of-30℃ ~100℃.In case of other working conditions, you can refer to the standard.

 

1. Application scope and characteristics

 
Anti-corrosion protection of outdoor pipes, pipe fittings, elbows and other products.

Compared with other types of coatings, environmental protection, easy to thick coating, good adhesion, with excellent cathode stripping ,anti-corrosion properties and mechanical damage resistance.

It has wide application range, and wide operating temperature range (-30℃~80℃).The broken areas are easy to repair.
 

2. Method and dosage

 

1 . Coating method: Electrostatic spraying,thermal spraying.

2 . Theoretical dosage:150g/M2/100μm.

3 .Surface treatment: Sandblasting or Pelblasting, or other suitable methods.

4 .Curing instructions:The powder coating is applied on the surface of 180~230℃ preheated workpiece, powder coating according to the bottom layer and surface layer (provided by the same manufacturer, with obvious color difference) sequential spraying, primary film, cured by waste heat, and generally does not need later heating. If the ambient temperature is very low or the heat capacity of the workpiece is insufficient, additional heating and curing is required.

 

3.Production Department

 

Weather-resistant double-layer anti-corrosion powder 0 Weather-resistant double-layer anti-corrosion powder 1 Weather-resistant double-layer anti-corrosion powder 2

 

4. Paking

 

Weather-resistant double-layer anti-corrosion powder 3 Weather-resistant double-layer anti-corrosion powder 4 Weather-resistant double-layer anti-corrosion powder 5

Подобные продукты